indi-eqmod testing

Testing a build from git using
 indi_getprop *.TELESCOPE_PIER_SIDE.*
and
north guide pulses from within phd2







1. position A : CW down, pointing South and East, approximately on celestial equator (dec 0)
EQMod Mount.TELESCOPE_PIER_SIDE.PIER_WEST=On
EQMod Mount.TELESCOPE_PIER_SIDE.PIER_EAST=Off
phd2 pulse north = dec increases

2. position B: move the dec axis north through the pole
EQMod Mount.TELESCOPE_PIER_SIDE.PIER_WEST=Off
EQMod Mount.TELESCOPE_PIER_SIDE.PIER_EAST=On
phd2 pulse north = dec decreases

3. position A1: move dec axis south back to A, move RA axis west until scope goes past meridian (counterweights slightly up)
EQMod Mount.TELESCOPE_PIER_SIDE.PIER_WEST=On
EQMod Mount.TELESCOPE_PIER_SIDE.PIER_EAST=Off
phd2 pulse north = dec increases

4. position D: meridian flip the scope so it is on the east side of pier pointing West
EQMod Mount.TELESCOPE_PIER_SIDE.PIER_WEST=Off
EQMod Mount.TELESCOPE_PIER_SIDE.PIER_EAST=On
phd2 pulse north = dec decrease

5. position C: move dec axis north through the pole to position C
EQMod Mount.TELESCOPE_PIER_SIDE.PIER_WEST=On
EQMod Mount.TELESCOPE_PIER_SIDE.PIER_EAST=Off
phd2 pulse north = dec increases

6. position D1: move dec axis south back to position D, then move RA axis east until scope goes past meridian (CW slightly up)
EQMod Mount.TELESCOPE_PIER_SIDE.PIER_WEST=Off
EQMod Mount.TELESCOPE_PIER_SIDE.PIER_EAST=On
phd2 pulse north = dec decreases